Little Black Dresser

Once I decided to take the plunge and open a consignment booth at the all new Antique Village mall, I figured I’d better start treasure hunting. I drug my boyfriend down to the Santee swapmeet one weekend and as we were cruising through I saw this cute little black dresser. It had three drawers, ugly handles, and one drawer that was badly cracked in the front along the bottom.

It sure didn’t look like much and my b.friend took one look at it and one look at me, shook his head and said “it looks like a lot of work to me”. But I was sold on the piece with its super cute size and detail…I just knew that if I “updated” the shabby chic paint it would be fabulous. So I bargained with the seller for a mere $7 and loaded it up!

I got the treasure back to the workshop and started stripping it right away. This was my first real refinishing project so the whole idea of using chemical solvents to remove alllll that black paint, was a bit daunting! Once I got a small area cleared though I realized there was some mighty purdy oak underneath! This was too good to repaint! I decided I must strip it down and restain it!

After only a couple of days and LOTs of sanding … I had it all stripped down to the raw wood.

The fish scales and fluted side columns lent to its endearing charm…

After using the chemical stripper to remove the top layers of old paint I chose to use a 60 grit sandpaper to bring it down the rest of the way. Then I used an 80 grit and finally 220 grit. I filled in the cracked/broken piece with some wood filler several times and continued to sand it down to blend the filler with the surface.

Once I had it all polished out and smooth I put the first coat of Minwax Golden Oak stain on it…wooohooooo!

The stain was the perfect shade and it brought out the grain. I did the standard 2 coats of stain and then finished it off with 2 coats of Minwax Semi-Gloss Polyurethane.

After all that hard work, the hardest part was actually finding new hardware! I hadn’t ventured out yet to find original antique hardware yet so it was back to Home Depot to look for something simple and understated (and cheap). I found some nice burnished black copper handles that fit the piece nicely.

Got the whole piece finished in about 4 days and took it down at the shop. It sat there for several weeks before I finally decided to put it on sale. After marking it down to $99, it sold right away!

Once my b.friend saw how nice it was all refinished, he’s hardly questioned my opinion on the “lotta work” pieces since!

Advertisements

Hello world!

Hello friends…it’s a new day, a new month and a new life…  =)

I’ve been joking for many many years that my life would surprise even the most well traveled individual and that someday I’ll tell ya all about it…like “read the book” … starting today you may learn some startling details and revelations about a person you didn’t really know at all…sometimes people do surprise us, pleasantly.